Ai -30°C 30L Recirculating Chiller with 20L/min Centrifugal Pump
Ai C30 series recirculating chillers are true thermostatic control laboratory chillers. This closed laboratory chiller is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching, and jacketed reactors.
This system can also be used as a replacement to tap water cooling in laboratory applications.
The Ai C30 are compressor-based recirculating chillers that offer outstanding performance, high reliability, quiet operation, and ease-of-use.
The powerful force/suction pump provides constant flow rates, while the microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
C30 circulating chiller features
- No dry ice or liquid nitrogen needed
- Advanced PID digital temp controller
- All steel construction for durability
- Cost saving as the water consumption is completely eliminated
- Built-in casters for mobility
- Plug and play; no assembly required
Specifications
| Model | C30-30-20L |
| Electrical requirements | 220V 60Hz 1-PH 9A, 1990 watts |
| Compressor | Make: Panasonic Power: 208-230V 60Hz 1-Phase Number of compressor: One Refrigerant: R410A |
| Cooling capacity (assuming working environment is 25°C/77°F) | @ 32°F/0°C: 2800W @ 14°F/-10°C: 1800W @ -4°F/-20°C: 1000W @ -22°F/-30°C: 500W |
| Reservoir | Capacity:30 liters or 8 gallons Dimensions: 23 x 15 x 7″ (WxDxH) Material: Type 304 stainless steel Chilling fluid connection: 3/8″ hose barb x 2 |
| Recirculating pump | Pump type: Centrifugal Output: 100 watts Pumping speed: 5.3 gallon/min or 20L/min Maximum head: 20 feet or 6 meters Pressure: 5.8 psi |
| Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
| Temperature controller | Range: ambient to -30°C/-22°F Accuracy: +/- 2°C Type: Digital microprocessor PID controlled Range: -30°C (-22°F) to Ambient Display unit: Celsius °C |
| Tempeature sensor type | Pt100 |
| Housing | Powder coated type 42 stainless steel |
| Recommended coolant | For 50°F/10°C or higher: distilled water. Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water |
| Built-in swivel casters | Four |
| Safety | Compressor over-temp protection Short circuit and ground protection Over-current protection |
| Dimensions (WxDxH) | Unit: 30 x 19.5 x 34″ Shipping: 38 x 25 x 45″ |
| Unit weight | 220 lbs |
| Recommended for | Ai SolventVap 20L rotary evaporators and 10L jacketed reactors |
All vacuum purge equipment is intended for lawful purposes only.