Ai -30°C 10L Recirculating Chiller with 20L/Min Centrifugal Pump
Ai C30 series recirculating chillers are true thermostatic control laboratory chillers. These closed laboratory chillers are ideal for applications such as cooling rotary evaporators, vacuum systems, and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
Recirculating Chiller Key Features
- Compressor-based for outstanding performance and high reliability.
- Quiet operation and ease-of-use.
- Powerful force/suction pump provides constant flow rates.
- Microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
Ai C30 Circulating Chiller Features
- No dry ice or liquid nitrogen needed.
- All steel construction for durability.
- Small footprint saves valuable lab space.
- Cost saving as the water consumption is completely eliminated.
- Plug and play, no assembly required.
|Electrical requirements||220V 60Hz 1-PH, 1100 watts|
|Compressor|| Make: Panasonic|
Power: 110V or 208-230V 60Hz 1-Phase
Number of compressor: One
| Cooling capacity|
environment is 25°C/77°F)
| @ 32°F/0°C: 1250W|
@ 14°F/-10°C: 800W
@ -4°F/-20°C: 300W
@ -22°F/-30°C: 150W
|Reservoir|| Capacity: 10 liters or 2.6 gallons|
Material: Type 304 stainless steel
Chilling fluid connection: 3/8″ hose barb x 2
|Recirculating pump|| Pump type: Centrifugal|
Output: 100 watts
Pumping speed: 5.3 gallon/min or 20L/min
Maximum head: 20 feet or 6 meters
Pressure: 5.8 psi
|Coolant outlet pressure||Displayed on the built-in mechanical pressure gauge|
|Temperature controller|| Range: ambient to -30°C/-22°F|
Accuracy: +/- 2°C
Type: Digital microprocessor PID controlled
Range: -30°C (-22°F) to Ambient
Display unit: Celsius °C
|Tempeature sensor type||Pt100|
|Housing||Powder coated type 42 stainless steel|
|Recommended coolant|| For 50°F/10°C or higher: distilled water.|
Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water
|Built-in swivel casters||Four|
|Safety|| Compressor over-temp protection|
Short circuit and ground protection
|Dimensions (WxDxH)|| Unit: 26.5 x 17 x 27″|
Shipping: 32 x 22 x 36″
|Unit weight||155 lbs|
|Recommended for||Ai SolventVap 5L rotary evaporators|
All vacuum purge equipment is intended for lawful purposes only.