Ai -30°C 17L Recirculating Chiller with 20L/Min Centrifugal Pump

Ai C30 series recirculating chillers are true thermostatic control laboratory chillers. These closed laboratory chillers are ideal for applications such as cooling rotary evaporators, vacuum systems, and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
Recirculating Chiller Key Features
- Compressor-based for outstanding performance and high reliability.
- Quiet operation and ease-of-use.
- Powerful force/suction pump provides constant flow rates.
- Microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
Ai C30 Circulating Chiller Features
- No dry ice or liquid nitrogen needed.
- All steel construction for durability.
- Small footprint saves valuable lab space.
- Cost saving as the water consumption is completely eliminated.
- Plug and play, no assembly required.

Specifications
Model | C30-17-10L |
Electrical requirements | 220V 60Hz 1-PH, 1200 watts |
Compressor | Make: Panasonic Power: 208-230V 60Hz 1-Phase Number of compressor: One Refrigerant: R410A |
Cooling capacity (assuming working environment is 25°C/77°F) | @ 32°F/0°C: 1750W @ 14°F/-10°C: 1100W @ -4°F/-20°C: 700W @ -22°F/-30°C: 300W |
Reservoir | Capacity: 17 liters or 4.5 gallons Material: Type 304 stainless steel Chilling fluid connection: 3/8″ hose barb x 2 |
Recirculating pump | Pump type: Centrifugal Output: 100 watts Pumping speed: 5.3 gallon/min or 20L/min Maximum head: 20 feet or 6 meters Pressure: 5.8 psi |
Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
Temperature controller | Range: ambient to -30°C/-22°F Accuracy: +/- 2°C Type: Digital microprocessor PID controlled Range: -30°C (-22°F) to Ambient Display unit: Celsius °C |
Tempeature sensor type | Pt100 |
Housing | Powder coated type 42 stainless steel |
Recommended coolant | For 50°F/10°C or higher: distilled water. Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water |
Built-in swivel casters | Four |
Safety | Compressor over-temp protection Short circuit and ground protection Over-current protection |
Dimensions (WxDxH) | Unit: 26.5 x 18 x 30.5″ Shipping: 32 x 23 x 40″ |
Unit weight | 175 lbs |
Recommended for | Ai SolventVap 10L rotary evaporators |
All vacuum purge equipment is intended for lawful purposes only.