Ai -30°C 30L Recirculating Chiller with 20L/min Centrifugal Pump

Ai C30 series recirculating chillers are true thermostatic control laboratory chillers. This closed laboratory chiller is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching, and jacketed reactors.

This system can also be used as a replacement to tap water cooling in laboratory applications.

The Ai C30 are compressor-based recirculating chillers that offer outstanding performance, high reliability, quiet operation, and ease-of-use.

The powerful force/suction pump provides constant flow rates, while the microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

 

C30 circulating chiller features

  • No dry ice or liquid nitrogen needed
  • Advanced PID digital temp controller
  • All steel construction for durability
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Plug and play; no assembly required

Specifications

 Model  C30-30-20L
 Electrical requirements  220V 60Hz 1-PH 9A, 1990 watts
 Compressor  Make: Panasonic
Power: 208-230V 60Hz 1-Phase
Number of compressor: One
Refrigerant: R410A
 Cooling capacity
(assuming working
environment is 25°C/77°F)
 @ 32°F/0°C:       2800W
@ 14°F/-10°C:    1800W
@ -4°F/-20°C:    1000W
@ -22°F/-30°C:   500W
 Reservoir  Capacity:30 liters or 8 gallons
Dimensions: 23 x 15 x 7″ (WxDxH)
Material: Type 304 stainless steel
Chilling fluid connection: 3/8″ hose barb x 2
 Recirculating pump  Pump type: Centrifugal
Output: 100 watts
Pumping speed: 5.3 gallon/min or 20L/min
Maximum head: 20 feet or 6 meters
Pressure: 5.8 psi
 Coolant outlet pressure  Displayed on the built-in mechanical pressure gauge
 Temperature controller  Range: ambient to -30°C/-22°F
Accuracy: +/- 2°C
Type: Digital microprocessor PID controlled
Range: -30°C (-22°F) to Ambient
Display unit: Celsius °C
 Tempeature sensor type  Pt100
 Housing  Powder coated type 42 stainless steel
 Recommended coolant  For 50°F/10°C or higher: distilled water.
Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water
 Built-in swivel casters  Four
 Safety  Compressor over-temp protection
Short circuit and ground protection
Over-current protection
 Dimensions (WxDxH)  Unit: 30 x 19.5 x 34″
Shipping: 38 x 25 x 45″
 Unit weight  220 lbs
 Recommended for  Ai SolventVap 20L rotary evaporators and 10L jacketed reactors

 

All vacuum purge equipment is intended for lawful purposes only.