!-- Google Tag Manager --> E44 Elite Series 4.4 Cu Ft Vacuum Oven | Cannabis Extraction Equipment - AiVacOvens

E44 Elite Series 4.4 Cu Ft Vacuum Oven

Ai Vac Ovens

The E44 4.4 cu ft. model is the second largest vacuum oven in the Elite Series. Like the E23 and E10, it also comes standard with our new 5-side chamber jacket heating system. It also comes equipped with 6 aluminum shelves that are removable, and is constructed with solid stainless steel.

Elite Series Features

The Elite E44 comes equipped with the most important features and functions needed to properly purge BHO and other material solvents.

New 5-Side Chamber Jacket Heating

The heating jacket covers the left, right, up, down and backside of the oven chamber providing perfect temperature uniformity, accuracy, and rapid fast heating rates.


In addition to our in-shelf heating, the low proportional gain temperature controller keeps your oven’s temperature within +/- 1°C accuracy while in use.

Optimal Vacuum Levels

Our ovens greatly reduce drying time of your extracts by maintaining a deep, consistent vacuum level within the chamber – making them the best choice for curing and converting oil extracts.

Increased Productivity, Quality, and Consistency

Our ovens produce deep vacuum level that allow them to operate at the optimal temperature for allowing the purging process to occur rapidly. The result is an increase in the consistent output of superior quality extracts with a minimal processing time.

DimensionsOven Chamber = 19.7″W x 19.7″D x 19.7″H; Unit = 32″W x 29.”W5 x 41″H
InteriorStainless steel.
Safety FeaturesOver temperature protection dial and safety switch.
Shelves6 removable aluminum shelves (upgrades available).
Temp ControlDigital temperature controller.
Quality ControlAll vacuum ovens undergo a 24hr vacuum leak test twice and are 100% quality controlled at either our New Jersey or Nevada facility before shipment.


All vacuum ovens are intended for lawful use only.

Attention – Before Initial Use: Run oven at 400°F without vacuum for a total of 15 minutes to burn off any residue that may have been introduced during the manufacturing process.